TracCloudGuideProfilePrefsSchedule

From Redrock Wiki

Revision as of 16:57, 24 April 2023 by Redrock (talk | contribs)


Scheduling Preferences

Your scheduling preferences allow you to modify appointment booking rules, controlling exactly when a student can book appointments, how many appointments they can book, and much more. These preferences will apply to all centers within the profile.

Time Restrictions

File:1611978.png

  • Schedule no sooner than...And no later than
This preference controls how early or late a student can book an appointment.


  • No Cancellation within
Determines how late the student can cancel an appointment.


  • Minimum and Maximum Appointment Duration
This preference controls the minimum/maximum possible appointment time. If you exclusively offer 30 or 45-minute appointments, you can set these preferences to match that difference.


  • Default appointment duration
The default duration of an appointment. Typically used in an open-schedule environment, where consultants are available for many hours at a time, this will be the default duration when a student goes to book an appointment.


  • Appointment start in increments of
Increments of time that booked appointments can start at. For example, if this preference is set to 15 minutes, appointments could be booked at 9:15, 9:30, 9:45, and so on.


  • Appointment duration in increments of
Increments of time that an appointment can be booked for. For example, if this is set to 10 minutes, appointments can be booked for 20 minutes, 30 minutes, 40, and so on.


  • Restrict duration to intervals
The durations specified here will control the appointment durations shown during the appointment booking process.
4u3j4h1232rf23.png


File:6313465.png

  • Prevent booking consecutive appointments same student / consultant:
This prevents students from booking consecutive appointments with a tutor. Prevent Student applies this rule to students booking their own appointments, and Prevent Staff applies this rule to staff members booking on behalf of students. If the staff member's permission group has override permissions, they can override this rule (a warning informs them of this).


  • Allow entry into online appointment session
These preferences control how soon/late a student can join a remote tutoring session by restricting when the Join button is available. If you’d like the student to be able to join 5 minutes prior to the start time through to the end, you would need to set “No sooner than” to 00:05 and set “No later than” to a value such as “1:00” (assuming you’re holding 1-hour appointments).


  • QR Codes expire after
This applies to Batch Visit QR Codes and Ad-hoc Drop-in QR codes. If this is left blank, these codes can be used at any time (but will only create a visit for the time they were originally set for). By setting this to a specific time, you can restrict students from scanning these QR codes too late, preventing them from retroactively creating a visit. This preference counts from the start time of the session.

Special Fields

File:9967198.png

Each group of settings—Reasons, Locations, Sections, Fund—can be precisely adjusted to control where they show up and whether or not they’re required.
Enter in avail determines whether or not the field shows up within the availability entry window.
Enter in appointment determines whether or not the field shows up within the appointment entry window.
Required for Search means that in order for appointments in this profile to appear in search results, this field must not be empty.
Required for Save marks the field as required, so it must be filled out prior to booking the appointment. This applies more-so to Staff, as the above option already requires a student to have this field selected before they have the chance to book.


  • Appointment Location Choices
Allows to you to customize the locations available to choose from on Availability and Appointment entry.


  • Appointment Fund Choices
Allows you to customize the funds available to choose from on Availability and Appointment entry.


  • Quick Visit: Consultant Required
This makes the Consultant field in visit records required (i.e., you can't save without selecting a consultant).

Other Schedule Options

File:5148394.png

  • Allow students to cancel appointments
Provides students the option to cancel appointments (as long as they’re outside the time range specified in the first menu.)


  • Display consultant alias on availability search
This will display the consultant’s alias (specified in their staff profile) rather than their full name when students/staff are searching for availabilities. An alias can also be automatically generated based on your System Preferences (e.g., First Name Last Initial).


  • Display consultant email/phone/photo on appointment entry
Displays the consultant’s specified information within appointment records.


  • Allow group online/in-person per time slot determined by first person that day and time
If this is enabled, the first student booking an Online-Optional Multi-Person Availability decides if the session will be online or in-person. If this is disabled, each student booking the same time slot can choose online/in-person independently.


  • Allow sessions to be marked as ‘live doc’ sessions
If the Whiteboard module is in use, this preference can be enabled to allow sessions to be marked as "Live doc." This allows consultants and students to join a virtual Whiteboard room with text-chat and a shared document.


  • Allow student to upload documents to the appointment
Controls whether or not students can upload documents to the appointment record.


  • Allow staff to upload documents to the appointment
Controls whether or not staff can upload documents to the appointment record.


  • Block students from booking recurring appointments
Prevents students from booking recurring appointments.


  • Cancel recurring appointments after # consecutive misses/cancellations
These options only apply to recurring appointments. In the event that a student consecutively misses/cancels your max number of appointments in their appointment series, the Trac System will automatically cancel the remaining sessions.

Appointment Status and Management

File:1760620.png

  • Appointment Status Choices
These are the statuses that appointments can be set to. Typically, this would be set to something similar to the above example, with an Attended, Missed, and Canceled status, however, you can modify the choices if needed. Statuses containing the phrase “Cancel” will always cancel the appointment, making it available for other users to book (provided they’re still within the “schedule no later than” time limit.)


  • Status for attended
This is the status that TracCloud views as “Attended.” When students log in and log out during their appointment time, this is the status that the appointment will be automatically set to. If a staff member manually marks an appointment as this Attended status, a visit record will be automatically created.


  • Status for missed
This is the status that TracCloud views as “Missed.” Just like the above preference, this is the status that appointments without matching visits will be automatically set to.


  • Calc Missed Appointments Since
A student’s total number of missed appointments can be utilized in emails via the Twig tag “CalcMissedAppointments(Student.Sequence, Center.ProfileID)”. This date determines how far back TracCloud searches for missed appointments. If this preference is blank, the global System Preferences date is used instead. More information on Twig can be found in our dedicated Twig document.


  • Status for late cancellation
If left blank, a late cancellation will be recorded as "CANCEL - MISSED" (or your Profile's version of the "Missed" phrasing). You can use this to change the phrasing of this status entirely, but make sure to include the word "Cancel" somewhere in the status otherwise TracCloud will not send a cancellation email or open the time slot for other students.


  • Additional text message for late cancellation prompt / warning
This is an optional additional message that displays to students when they are cancelling an appointment outside of your time restriction. This appears in addition to the standard "This will be marked as missed" notice.

Max Appointment Rules and Blocks

1693361.png

These preferences allow you to restrict students from booking excessive appointments, or prevent booking/logins altogether. “Max Appointment Rules” allow you to create restrictions that will dynamically block students from booking appointments if their appointment threshold his met, while “Block Students to this Profile” allows you to block access to logging in for visits or booking appointments based whether or not the student is on a specified List.

Max Appointment Rules

File:5494722.png

  • Allow a maximum of X [hours/appointments] with:
Choose how many appointments/total hours a student can book within the restrictions assigned below.


  • ID Number (#1234ABCD)
Unique identifier for this rule, used for Twig in failure message.


  • Same: [Consultant / Reason / Center / Subject / Location]
This allows you to narrow down the restriction to specific fields. Maybe you don’t want a student booking excessively with a specific consultant, or booking too many appointments for a specific reason, this is where you would apply these rules.


  • add a search clause…
Search clauses allow you to be much more specific beyond the “Same:” settings. Here you can add a specific Reason, rather than reasons as a whole. You can only apply this rule to a specific center by adding a center clause. You can even select Student fields here, such as Status, Grad, and Major, that way you can apply this rule to only a specific set of students.


  • in X [Days / Weeks / Months / Terms / Years]
The time period for this rule. This lets you choose when this rule is put into effect, maybe you want to restrict students from booking more than 3 appointments per week, or 10 appointments per month. This preference is where you’ll make that decision.
If “1 week” is used, this will be on a Sunday to Saturday schedule, if “1 month” is used, this will be the first to last day of the month. If you would prefer any 7 or 30-day window, you will need to use something like “7 Days” rather than “1 Week”.


  • Appointment dates in the time period
The date range that this rule is effective for. Maybe the start of the semester, or a yearly period.


  • This rule applies to
This Student applies to only the student booking the appointment. John Doe (a student) can’t book more than 3 appointments with the same consultant per week.
All Students applies to every student. Jane Smith (a tutor) can’t be booked more than 3 appointments per day (by students).


  • For student
Allows you to only apply this rule to a certain list of students (or students not on a specific list).


  • And also applies to
Which appointment types should this apply do? If left blank, this rule is applied to all appointment types. However, you can also only apply this rule to one-on-one or in-person appointments if needed.


  • Rule Failure Message
This is an optional custom message that can appear to students if they reach the limit of this rule.
9370938.png
Twig can also be used in this field to display student or consultant information. You can also modify the contents of the message based on which rule was broken. For example:
{% for failRule in failRules %}
{% if failRule.id == "1Y0GYPWS" %}
Sorry, you can only have one upcoming appointment at a time. Please try again later.
{% elseif failRule.id == "HKIEAATS" %}
You can only book 4 appointments per week, if you think an exception needs to be made, reach out to us at help@school.edu.
{% endif %}
{% endfor %}

Block Students to this Profile

  • Prevent Scheduling is where you will select a list of students that you want to prevent from booking appointments.
  • Message to Display to a Blocked Student is the message displayed when a student on that list tries to book an appointment.
Oinwouigng2482y5.png


  • Prevent Login prevents the student from being logged in on the Log Listing or a Kiosk.
  • Message to Display to a Blocked Student is the message displayed when the student tries to login on a Kiosk or a staff member tries to log them in on the Log Listing.
35j35j43k46k4k4635g.png

Search Availability Badges

Search Availability badges can be used to add information and indicators to availability slots. Each badge can appear in specific contexts, based on center, availability section/reason, location, skills/accommodations, etc.

File:7942458.png

Click New Availability Badge to begin creating your new badge.

File:8036271.png

Any fields left blank will not be considered for where this badge appears, you can be as specific or non-specific as needed. You can also create as many badges as you'd like, more than 1 tag can appear for the same availability. Info Text appears when a user hovers their mouse over the badge in the search availability menu.

File:3529335.png